Wireless HDMI Extender Transmitter Dongle & Receiver @1080P up to 100 Feet (WHD-PRO100-K)
OREI WHD-PRO100-K: Wireless HDMI Extender Upto 100 Ft
Extend full HD 1080p signal up to 100 feet wirelessly. Will not transmit through walls, direct signal only. Using Channel 128 & 132 on a 5 GHz wireless band
Connect the transmitter to an HDMI camera and the receiver to an HDMI monitor, power the transmitter with a Micro USB cable to the laptop or even a power bank.
Support point to point wireless Connection, support: HDMI 480i 60Hz, 480p 60Hz, 576i 60Hz, 576 50Hz, 720p 50/60Hz, 1080i 50/60Hz, 1080p 50/60Hz, 20
Plug & play setup without any software installation.
Includes: 1 x transmitter, 1 x receiver, 1 x power adapter, 1 x user manual. 1 Year Orei Manufacturer's warranty
[tab] [/tab] [shortdes]
- Supports 1080p up to 100 feet line of sight long distance transmission
- Less than 300ms latency
- HDCP compliant
AUDIO AND VIDEO
| Transmitter: | INPUT PORTS: | HDMI Input Type A [19-pin Male] |
| Receiver: | OUTPUT PORTS: | HDMI output Type A[19-pin Female] |
COMPLIANCES
| HDMI Compliance | HDMI 1.3a |
| HDCP Compliance | HDCP 2 |
EXTENDING DISTANCE
| 1080p@60Hz: | 30M/100 feet(L.O.S) |
VIDEO OUTPUT
| Video Bandwidth: | 148.5MHZ |
| Video Resolutions: | 1080P/60Hz |
| Color Space: | RGB/YUV4:4:4 |
| Color Depth: | 8bit |
LOOP-OUT/LOCAL PORT
| Has loop out port: | No |
AUDIO OUTPUT
| HDMI Audio Formats: | PCM2.1/Dolby5.1 |
SIGNALS
| TMDS Signals: |
Yes |
| DDC Signals: |
Yes |
WIRELESS PERFORMANCE & INTERFACE
| Transmission Type: | WiFi |
| Transfer Method: | 802.11 a/b/g/n |
| Latency: | Max. 0.3 sec. latency |
| Transmission Distance: | 30M/ 100 feet (L.O.S) |
| Maximun Pixel Clock: | 12M(H.264) |
DIMENSIONS & WEIGHT
| Transmitter: | Height: | 15.5mm |
| Width: | 38mm | |
| Depth: | 85.5mm | |
| Weight: | 40 gw | |
| Receiver: | Height: | 13.8mm |
| Width: | 85mm | |
| Depth: | 83mm | |
| Weight: | 65 gw |
PROTECTION
| Operation Temperature: | 0~45℃ |
| Storage temperature: | -10~60℃ |
| Relative Humidity: | 10%~80% |
| ESD Protection: | 4K/8K |
| Electrostatic Protection of the whole Machine: | OVP/OCP |
POWER
| Power Consumption (Max): | Transmitter: | 5W | |||
| Receiver: | 5W | ||||
| Power Supply | Input: | 100~240V | |||
| Output: | 5V 1A |
PHYSICAL PROPERTIES
| Color: | Black |
| Housing: | Plastic |
| Finishing: | Matte |
PACKAGE CONTENTS
| 1x HDMI Transmitter |
| 1x HDMI Receiver |
| 1x Type A USB to Micro USB power cable (Y type model) |
| 1x DC 5V/1A power adaptor (Micro USB type) |
| 1x User Manual |
WARRANTY
| 1-Year Manufacturer's Warranty |
[tab1]
FAQs
Please try the following steps to resolve your pixelating issue:
- Please try replacing your current HDMI cables with High-Quality HDMI cables.
- Please make sure that you dont have any other wireless devices such as wifi router nearby this extender. If you have a wifi router, then please try moving the router away as the wireless signals interfears with each other & causing this issue.
Our all the extenders supports IR Frequency & the devices using RF frequency will not be compatible with our products.
The IR Blaster/Emitter should be connected to the IR out port on the Transmitter and the IR Receiver should be connected to the IR in on the Receiver.
Here's a quick overview of the IR connection on our extenders: IR Blaster Explained | Use IR with HDMI Extender Kit - Remote Control
Original: $99.99
-70%$99.99
$30.00More Images
Wireless HDMI Extender Transmitter Dongle & Receiver @1080P up to 100 Feet (WHD-PRO100-K)
OREI WHD-PRO100-K: Wireless HDMI Extender Upto 100 Ft
Extend full HD 1080p signal up to 100 feet wirelessly. Will not transmit through walls, direct signal only. Using Channel 128 & 132 on a 5 GHz wireless band
Connect the transmitter to an HDMI camera and the receiver to an HDMI monitor, power the transmitter with a Micro USB cable to the laptop or even a power bank.
Support point to point wireless Connection, support: HDMI 480i 60Hz, 480p 60Hz, 576i 60Hz, 576 50Hz, 720p 50/60Hz, 1080i 50/60Hz, 1080p 50/60Hz, 20
Plug & play setup without any software installation.
Includes: 1 x transmitter, 1 x receiver, 1 x power adapter, 1 x user manual. 1 Year Orei Manufacturer's warranty
[tab] [/tab] [shortdes]
- Supports 1080p up to 100 feet line of sight long distance transmission
- Less than 300ms latency
- HDCP compliant
AUDIO AND VIDEO
| Transmitter: | INPUT PORTS: | HDMI Input Type A [19-pin Male] |
| Receiver: | OUTPUT PORTS: | HDMI output Type A[19-pin Female] |
COMPLIANCES
| HDMI Compliance | HDMI 1.3a |
| HDCP Compliance | HDCP 2 |
EXTENDING DISTANCE
| 1080p@60Hz: | 30M/100 feet(L.O.S) |
VIDEO OUTPUT
| Video Bandwidth: | 148.5MHZ |
| Video Resolutions: | 1080P/60Hz |
| Color Space: | RGB/YUV4:4:4 |
| Color Depth: | 8bit |
LOOP-OUT/LOCAL PORT
| Has loop out port: | No |
AUDIO OUTPUT
| HDMI Audio Formats: | PCM2.1/Dolby5.1 |
SIGNALS
| TMDS Signals: |
Yes |
| DDC Signals: |
Yes |
WIRELESS PERFORMANCE & INTERFACE
| Transmission Type: | WiFi |
| Transfer Method: | 802.11 a/b/g/n |
| Latency: | Max. 0.3 sec. latency |
| Transmission Distance: | 30M/ 100 feet (L.O.S) |
| Maximun Pixel Clock: | 12M(H.264) |
DIMENSIONS & WEIGHT
| Transmitter: | Height: | 15.5mm |
| Width: | 38mm | |
| Depth: | 85.5mm | |
| Weight: | 40 gw | |
| Receiver: | Height: | 13.8mm |
| Width: | 85mm | |
| Depth: | 83mm | |
| Weight: | 65 gw |
PROTECTION
| Operation Temperature: | 0~45℃ |
| Storage temperature: | -10~60℃ |
| Relative Humidity: | 10%~80% |
| ESD Protection: | 4K/8K |
| Electrostatic Protection of the whole Machine: | OVP/OCP |
POWER
| Power Consumption (Max): | Transmitter: | 5W | |||
| Receiver: | 5W | ||||
| Power Supply | Input: | 100~240V | |||
| Output: | 5V 1A |
PHYSICAL PROPERTIES
| Color: | Black |
| Housing: | Plastic |
| Finishing: | Matte |
PACKAGE CONTENTS
| 1x HDMI Transmitter |
| 1x HDMI Receiver |
| 1x Type A USB to Micro USB power cable (Y type model) |
| 1x DC 5V/1A power adaptor (Micro USB type) |
| 1x User Manual |
WARRANTY
| 1-Year Manufacturer's Warranty |
[tab1]
FAQs
Please try the following steps to resolve your pixelating issue:
- Please try replacing your current HDMI cables with High-Quality HDMI cables.
- Please make sure that you dont have any other wireless devices such as wifi router nearby this extender. If you have a wifi router, then please try moving the router away as the wireless signals interfears with each other & causing this issue.
Our all the extenders supports IR Frequency & the devices using RF frequency will not be compatible with our products.
The IR Blaster/Emitter should be connected to the IR out port on the Transmitter and the IR Receiver should be connected to the IR in on the Receiver.
Here's a quick overview of the IR connection on our extenders: IR Blaster Explained | Use IR with HDMI Extender Kit - Remote Control
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
OREI WHD-PRO100-K: Wireless HDMI Extender Upto 100 Ft
Extend full HD 1080p signal up to 100 feet wirelessly. Will not transmit through walls, direct signal only. Using Channel 128 & 132 on a 5 GHz wireless band
Connect the transmitter to an HDMI camera and the receiver to an HDMI monitor, power the transmitter with a Micro USB cable to the laptop or even a power bank.
Support point to point wireless Connection, support: HDMI 480i 60Hz, 480p 60Hz, 576i 60Hz, 576 50Hz, 720p 50/60Hz, 1080i 50/60Hz, 1080p 50/60Hz, 20
Plug & play setup without any software installation.
Includes: 1 x transmitter, 1 x receiver, 1 x power adapter, 1 x user manual. 1 Year Orei Manufacturer's warranty
[tab] [/tab] [shortdes]
- Supports 1080p up to 100 feet line of sight long distance transmission
- Less than 300ms latency
- HDCP compliant
AUDIO AND VIDEO
| Transmitter: | INPUT PORTS: | HDMI Input Type A [19-pin Male] |
| Receiver: | OUTPUT PORTS: | HDMI output Type A[19-pin Female] |
COMPLIANCES
| HDMI Compliance | HDMI 1.3a |
| HDCP Compliance | HDCP 2 |
EXTENDING DISTANCE
| 1080p@60Hz: | 30M/100 feet(L.O.S) |
VIDEO OUTPUT
| Video Bandwidth: | 148.5MHZ |
| Video Resolutions: | 1080P/60Hz |
| Color Space: | RGB/YUV4:4:4 |
| Color Depth: | 8bit |
LOOP-OUT/LOCAL PORT
| Has loop out port: | No |
AUDIO OUTPUT
| HDMI Audio Formats: | PCM2.1/Dolby5.1 |
SIGNALS
| TMDS Signals: |
Yes |
| DDC Signals: |
Yes |
WIRELESS PERFORMANCE & INTERFACE
| Transmission Type: | WiFi |
| Transfer Method: | 802.11 a/b/g/n |
| Latency: | Max. 0.3 sec. latency |
| Transmission Distance: | 30M/ 100 feet (L.O.S) |
| Maximun Pixel Clock: | 12M(H.264) |
DIMENSIONS & WEIGHT
| Transmitter: | Height: | 15.5mm |
| Width: | 38mm | |
| Depth: | 85.5mm | |
| Weight: | 40 gw | |
| Receiver: | Height: | 13.8mm |
| Width: | 85mm | |
| Depth: | 83mm | |
| Weight: | 65 gw |
PROTECTION
| Operation Temperature: | 0~45℃ |
| Storage temperature: | -10~60℃ |
| Relative Humidity: | 10%~80% |
| ESD Protection: | 4K/8K |
| Electrostatic Protection of the whole Machine: | OVP/OCP |
POWER
| Power Consumption (Max): | Transmitter: | 5W | |||
| Receiver: | 5W | ||||
| Power Supply | Input: | 100~240V | |||
| Output: | 5V 1A |
PHYSICAL PROPERTIES
| Color: | Black |
| Housing: | Plastic |
| Finishing: | Matte |
PACKAGE CONTENTS
| 1x HDMI Transmitter |
| 1x HDMI Receiver |
| 1x Type A USB to Micro USB power cable (Y type model) |
| 1x DC 5V/1A power adaptor (Micro USB type) |
| 1x User Manual |
WARRANTY
| 1-Year Manufacturer's Warranty |
[tab1]
FAQs
Please try the following steps to resolve your pixelating issue:
- Please try replacing your current HDMI cables with High-Quality HDMI cables.
- Please make sure that you dont have any other wireless devices such as wifi router nearby this extender. If you have a wifi router, then please try moving the router away as the wireless signals interfears with each other & causing this issue.
Our all the extenders supports IR Frequency & the devices using RF frequency will not be compatible with our products.
The IR Blaster/Emitter should be connected to the IR out port on the Transmitter and the IR Receiver should be connected to the IR in on the Receiver.
Here's a quick overview of the IR connection on our extenders: IR Blaster Explained | Use IR with HDMI Extender Kit - Remote Control
